Lansky QuadSharp Knife Sharpener
Lansky QuadSharp Knife Sharpener
Lansky QuadSharp Knife Sharpener
₱1,600.00 PHP
/
Lansky QuadSharp Knife Sharpener is the perfect portable knife sharpener and kit accessory. The built-in ceramic polishing benchstone allows this pocket sharpener to be used as a fully functional, stand alone sharpening solution. The smallest, most versatile multi-angle knife sharpener available!
Features
- Four Sharpening Angles: 17º, 20º, 25º, and 30º
- Carbide slots sharpen in 3-4 strokes
- Ceramic benchstone for fine polishing
- Rugged metal construction
- 100% compatible with all Lansky Kits and accessories
Instructions
- Maintain your knives in the field to the exact angle you set with your legendary Lansky Controlled-Angle System, or use as a fully functional, stand-alone sharpening solution. The carbide V-groove sharpens in 3 to 4 strokes. Next, freehand polish your newly sharpened edge on the built-in ceramic benchstone. Additionally, the ceramic benchstone is tapered for effectively sharpening serrations. See below for details.

-
Carbides: 17º, 20º, 25º and 30º
- Used to set an edge for an extremely dull blade or to sharpen the blade in seconds when the need arises.
- Holding the knife with your dominant hand, and using the other hand to hold the sharpener: pull the knife through the desired angle slot. Just three or four strokes using moderate pressure will restore your blade. Rinse blade thoroughly after sharpening.
-
Note: Carbide is extremely aggressive and should only be used for super quick sharpening as the need arises. For general edge maintenance: use the built-in ceramic benchstone element.
-
Ceramic Benchstone

- The medium (800) grit ceramic element should be used in a benchstone type fashion, or like a butcher steel. The Ceramic Benchstone is harder than steel, will never wear out, and can be used often as the primary sharpening element of your QuadSharp™. The Ceramic Benchstone is also tapered for sharpening serrated knives.
- (PRO-TIP: Extremely dull blades should be re-profiled in one of the carbide slots before using the ceramic benchstone).
- Eventually metal shavings will accumulate as dark streaks on the ceramic and will slow effectiveness. Clean with a Lansky EraserBlock.
-
Sharpening Serrations
-
Sharpen one serration at a time by pulling the ceramic elementagainst the
grooved side of the serration.For larger serrations: use a rolling motion to sweep the corner of the sharpener from one side of the serration to the other. Repeat until serration is sharp then move to the next serration.
-
Ceramic Benchstone
Country of Origin: China